Hitachi DZ-GX5080A - LOCKING SCENES ON CARD (LOCK); To unlock the scene

|
LOCKING SCENES ON CARD (LOCK)
You can lock each photo recorded on card so that it will not be deleted or edited by mistake.
1Set the power switch to "tt_".
2 Press the DISC NAVIGATION button.
3 Select the scene to be locked.
OTo unlock the scene
Select the locked scene, and then use the same
procedure as above to unlock the scene: The lock
icon will disappear and locking will be released.
4Press the MENU button.
5 Choose "Lock" on the "Scene" menu screen,
and then press the _/|| button.
6The "Lock Set" screen will appear: If you are
sure you want to lock the selected scene,
press the I,,/11 button.
Lock icon
Note:
• If you press the MENU button before pressing the
I_/11 button in step 6, the submenu screen will appear
(p. 78),
• You can also select multiple scenes (p, 73).
• When initializing the card, the locked scenes will also
be deleted,
If you want to change the scene to be locked,
you can change it on this screen.
After setting, the "Lock Set" screen will be
restored.
Repeat step 6 to lock another scene.
7 Press the • button to quit.
The lock icon "_" will appear on any scene
for which lock has been set.
84