Hitachi E-Compact Medium Power Series - Page 33

33 | 106
E-Compact Medium Power
When navigating through the different functions (status and setup), take into consideration the
keyboard symbols and the descriptions below (See 5.1.1 Interfaces):
▲ Moves the arrow UP to the next function shown on LCD screen
▶ Moves the arrow to the next RIGHT position
▼ Moves the arrow DOWN to the next function shown on LCD screen.
◀ Moves the arrow to the next LEFT position.
ENTER - Confirms the chosen selection.
ESC - Cancel the selection and return to the previous screen.
When browsing the LCD screen, you will have access to status reading or settings changes. In order to
orient yourself in this interface, attention should be paid to the menu structure as follows:
09
Parameter Menu or Parameter in the
12
Current Menu or Current Parameter
Screen.
13
Changing Parameter Value
10
Number of Parameter Menu or
14
Current Parameter Value
Parameter in the Screen / Total
15
When show “ * “ indicates that the
Number of Parameter or Menu.
changes is not yet active. For this
11
4 digit numbers represents the screen
It’ s necessary to press “ENTER” key
position on the command menu
For change any parameter, used ◀ for decrease or ▶ to increase.
09
10
11
09
10
11
12
14
15
13
12