Hitachi E-Compact Medium Power Series - AC Electrical Line Connection; Electrical Line Connection (Ec70 Xmp)

To Next Page

To Previous Page

82 | 106

E-Compact Medium Power

4.4. AC Electrical Line Connection

Prior to energizing the transmitter, one must make sure that the circuit breaker and

the power switch (ON / OFF) are switched off or disabled..

4.4.1. Electrical line connection (EC70xMP)

The Electrical Line is connected to the AC Unit:

Before Connecting the Machine to the AC Mains, one must ensure that the grid

Voltage meets the equipment’s settings. Any questions, please refer to Section 3

item 6.7. “AC Mains Protection Unit” of this manual.

Connection modes according to the Grid Voltage:

Never invert Neutral with Phase.

The screws must be properly tightened in order to avoid sparks.