90 | 106
2. Configuring the System
The WEB interface can be accessed through the Main or the Backup Control ModuleCM8001 via a web
browser through one of the IP addresses configured in the Control Module itself.
For navigation, you must use a recent internet browser, updated in its latest version.
To control the device through the web interface, we recommend Chrome or Firefox
Browsers,.
To configure the IP address, use the display navigation interface of the Control Module by accessing the
[4000] Remote Access Menu.
Default Configurations:
Main Control Module MC8001: Backup Control Module MC8001:
3. Browsing the System
3.1. Access Password
Enter the password, login and confirm.
Setup in factory:
Login : user
Password : linear
To Next Page
Loading...
Need help?
General