41 | 106
POWER AMPLIFIERS DRAWERS ALARMS
This list is directly related to the alarms that occur in the Power Drawers. When there is an alarm LED lit
(see item 5.2.6 - Signaling Leds - Power Amplifier Module) the alarm detail is displayed when accessing
the "System Alarms / Log" of the Control Module CM8001. Alarms can be a Notification (irregular
operation that generates no fault containment action) or a Critical alarm (Shutdown the device or reduces
its operational capability)
Usually when the alarm occurs, it is indicated in which device it happened:
Devices Identification:
“D” – Driver / Pré Driver
Alarms List:
PA704MP - POWER AMPLIFIER
Top View
PA702MP - POWER AMPLIFIER
Top View