Chapter 2 Specifications
2 – 44
(26) EH-YT32H
Item POM-TM, POH-TM (for replacing)
EH-YT32H (This product)
Series
EM/EM-II, H-200/250/252
EH-150
Output specification Transistor output (sink type)
Number of outputs 32
Rated load voltage 5/12/24V DC (5 to 27V DC)
Minimum switching current 1 mA
Leak current 0.05 mA maximum
Maximum output saturation voltage 1 V maximum
Maximum 1 point 0.1 A
load current 1 common
0.8 A
Output OFFÎON
1 ms maximum
response time ONÎOFF
1 ms maximum
Insulation method Photo-coupler insulation
Output display LED (red) LED (green)
External connection Connector (50 pins)
Number outputs / common 8 (4 commons, 4 terminals)
Surge removal circuit Diode (Connecting case of the S terminal)
Fuse *
1
1.5 A / 1 common 2 A / 1 common
External power supply *
2
(For supplying power to the S terminal)
5 to 27 V DC
(maximum 100 mA)
Internal current consumption (5 V DC) 70 mA maximum 90 mA maximum
Short-circuit protection None
*1 The fuse is not replaced by users. Please contact your local supplier to repair.
*2 It is necessary to supply 12/24 V DC to the S terminals.
Specification of external wiring connector
Product name Manufacturer Product No. Connection method
Wire
DX30-50P AWG#30
DX30A-50P
Untie crimping
AWG#28
DX31-50P AWG#30
DX31A-50P
Crimping
AWG#28
Plug connector
DX40-50P Soldering
－
Die cast cover
Hirose Electric Co., Ltd.
DX-50-CV1
－ －
To Next Page
Loading...
Need help?
General
