Section 3 3.1 Setting Print Format z 3–3
3.1.1-4 Inter-character space
z The space between characters can be varied.
z The following settings are available:
If a character size
exceeds the range
for this setting, the
nearest acceptable
value will be used.
3.1.1-5 Character width increase
z The character width can be enlarged.
z The available range of enlargement is from 1 to 9 times the original size.
Character size Inter-character space
5 x 8 or 5 x 7 0 to 3
7 x 10 0 to 3
12 x 16 0 to 4
To Next Page
Loading...
