Hitachi PB Series

4–10 z 4.4 Setting the Password Section 4
5. Press [C], [Z], [B], [0], and [5] successively.
6. Touch the line to set New password field.
The cursor is placed in the new password reentry field.
7. Press [C], [Z], [B], [0], and [5] successively.
8. Press [OK].
The password is updated, and you are returned to the "Environment setup menu"
screen.
If either of the following conditions occurs, an error message will appear:
1 The entry in the old password field does not agree with the current password.
The error does not occur if you type in "NOCHECK" for the password.
This is useful when you forgot your password.
z Old password mismatch
2 The entries in the new password field and new password reentry field do not
match.
z New password mismatch
ĸĺ
3DVVZRUGVHWXSXSGDWH
6WDWXV6WRS

6LJQ
2OGSDVVZRUG > ¿¿¿¿¿ @
1HZSDVVZRUG > ¿¿¿¿¿ @
1HZSDVVZRUGUHHQWU\ > ¿¿¿¿¿ @
ĸĺ
3DVVZRUGVHWXSXSGDWH
6WDWXV6WRS

6LJQ
2OGSDVVZRUG > ¿¿¿¿¿ @
1HZSDVVZRUG > ¿¿¿¿¿ @
1HZSDVVZRUGUHHQWU\ > ¿¿¿¿¿ @