EasyManua.ls Logo

Hitachi PB Series

Hitachi PB Series
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6–4 z 6.2 On-screen Message Descriptions Section 6
9 Noise fault S
Malfunction of the engine
section caused by noise.
z Turn OFF the power
and then turn back
ON.
10
Deflection Voltage
Leakage
The deflection electrode
voltage is too low.
z Dry the deflection elec-
trode and its adjacent
parts.
11 Deflection Voltage Fault
The high-voltage power
supply output voltage is
too low or too high.
z Contact your nearest
Hitachi distributor.
12
DC Power Supply Fan
Fault
Failure of the power
supply section.
z Contact your nearest
Hitachi distributor.
13 Charge Voltage Fault
The charge electrode is
shorted.
z Check that there is no
short-circuit with
another part.
14
Internal Communication
Error S
Failure of data processing
within the engine section.
z Turn OFF the power
and then turn back
ON.
15 F Memory Fault C
Failure of the main
controller section
hardware.
z Contact your nearest
Hitachi distributor.
16 F Memory Fault M
Failure of the engine
section hardware.
z Contact your nearest
Hitachi distributor.
17 F Memory Fault S
Failure of the engine
section hardware.
z Contact your nearest
Hitachi distributor.
18 Hardware Error C
Failure of the controller
section hardware.
z Contact your nearest
Hitachi distributor.
19 Ink Heating Fault
Failure of the ink heating
section.
z Contact your nearest
Hitachi distributor.
20 Heating Unit Sensor Fault
Failure of the ink heating
section.
z Contact your nearest
Hitachi distributor.
21 Heating Unit Fault
Overcurrent flow to the
heating unit.
z Contact your nearest
Hitachi distributor.
22
Ambient Temperature
Sensor Fault
There is an open circuit in
the ambient temperature
sensing element.
z Contact your nearest
Hitachi distributor.
23
Viscometer Temperature
Sensor Fault
Error in ink temperature
detected by viscometer
occurred.
z
Contact your nearest
Hitachi distributor.
24 Pump Motor Fault Pump motor is faulty.
z Contact your nearest
Hitachi distributor.
25 Cooling Fan Fault Cooling fan is defective.
z Contact your nearest
Hitachi distributor.
No. Message Meaning of message Remedy

Table of Contents

Related product manuals