6–6 z 6.2 On-screen Message Descriptions Section 6
10 Ink Drop Charge Too High
The value of the signal
that detects the particle
charge is too high.
z Clean the gutter,
deflection electrode,
adjacent parts.
z Adjust the excitation
setting to make sure
that the ink particles
are properly shaped.
z Adjust the ink pres-
sure.
z Check that the ink
beam is correctly
retracted.
11
Internal Communication
Error C
Failure of data processing
within the engine section.
z Turn OFF the power
and then turn back
ON.
12
Internal Communication
Error M
Failure of data processing
within the engine section.
z Turn OFF the power
and then turn back
ON.
No. Message Meaning of message Remedy
To Next Page
Loading...
