8 Troubleshooting
320
SMGB0064 rev.0 - 08/2011
a. By touching the + side of the tester to the P1 terminal of ISPM
and the - side of the tester to R and S of ISPM, measure the resist-
ance. If all the resistances are more than 1 kΩ, it is normal.
b. By touching the - side of the tester to the P1 terminal of ISPM
and the + side of the tester to R and S of ISPM, measure the re-
sistance. If all the resistances are more than 100 kΩ, it is normal.
c. By touching the - side of the tester to the N terminal of ISPM
and the + side of the tester to R and S of ISPM, measure the
resistance. If all the resistances are more than 1 kΩ, it is normal.
d. By touching the + side of the tester to the N terminal of ISPM
and the - side of the tester to R and S of ISPM, measure the re-
sistance. If all the resistances are more than 100 kΩ, it is normal.
e. By touching the + side of the tester to the P terminal of ISPM
and the - side of the tester to U, V and W of ISPM, measure the
resistance. If all the resistances are more than 1 kΩ, it is normal.
f. By touching the - side of the tester to the P terminal of ISPM and
the + side of the tester to U, V and W of ISPM, measure the re-
sistance. If all the resistances are more than 100 kΩ, it is normal.
g. By touching the - side of the tester to the N terminal of ISPM
and the + side of the tester to U, V and W of ISPM, measure
the resistance. If all the resistances are more than 100 kΩ, it is
normal.
h. By touching the + side of the tester to the N terminal of ISPM
and the - side of the tester to U, V and W of ISPM, measure the
resistance. If all the resistances are more than 1 kΩ, it is normal.
To Next Page
Loading...