Hitachi WL200 Series - 7.1 Installation of the GSDML File; 7.2 Parameter settings of WJ200; WL200; Chapter 8 PROFINET Specification

20
When a function code is shown…
When a data is shown…
ESC key
Move on to the next function group
Cancels the change and moves back to the
function code
SET key
Move on to the data display
Fix and stores the data and moves back to
the function code
 key
Increase function code
Increase data value
 key
Decrease function code
Decrease data value
 Note
Keep pressing [ESC] key for more than 1 second leads to d001 display, regardless the display situation. But
note that the display will circulates while keep pressing the [ESC] key because of the original function of the
key.
(e.g.         … displays . after 1 second)