Hitachi WL200 Series - Page 50

48
“d” Function
A
B
Units
Func.
Code
Name
Description

Intelligent output
terminal status
Displays the state of the intelligent
output terminals:




Scaled output frequency
monitor
Displays the output frequency scaled
by the constant in .
Decimal point indicates range:
0 to 3999


Hz times
constant

Output voltage monitor
Voltage of output to motor,
Range is 0.0 to 600.0V


V

Input power monitor
Displays the input power, range is
0.0 to 999.9 Kw


KW

Watt-hour monitor
Displays watt-hour of the inverter,
range is 0 to 9999000



Elapsed RUN time monitor
Displays total time the inverter has
been powered up in hours.
Range is 0. to 9999. /
1000 to 9999(10000 to 99990) /
100 to 999 (100000 to 999000)


hours

Elapsed power-on time
monitor


hours

Heat sink temperature monitor
Temperature of the cooling fin, range
is -20 to 150


C

Life check monitor
Displays the state of lifetime of
electrolytic capacitors on the PWB
and cooling fan.




Program counter monitor
[EzSQ]
Range is 0 to 1024




Program number monitor
[EzSQ]
Range is 0 to 9999




User monitor 0
[EzSQ]
Result of EzSQ execution, range is –
2147483647 to 2147483647




User monitor 1
[EzSQ]
Result of EzSQ execution, range is –
2147483647 to 2147483647




User monitor 2
[EzSQ]
Result of EzSQ execution, range is –
2147483647 to 2147483647




Dual monitor
Displays two different data
configured in  and .



Lifetime expired
Normal
Electrolytic caps
Cooling fan
ON
OFF
Relay 12 11