Hitachi X200 Series - Page 24

- 23 -
Terminal Tightening Torque and Wire Size
The wire size range and tightening torque for field wiring terminals are
presented in the tables below.
Motor Output Torque
Input
Voltag e
kW HP
Inverter Model
Power Terminal
Wiring Size
Range (AWG)
Ft-lbs (N-m)
0.2 1/4
X200-002SFE/NFU
0.4 1/2
X200-004SFE/NFU
0.6 0.8
0.55 3/4
X200-005SFE
0.75 1
X200-007SFE/NFU
14
(75°C only)
1.1 1 1/2
X200-011SFE
1.5 2
X200-015SFE/NFU
12
2.2 3
X200-022SFE/NFU 10
0.9 1.2
3.7 5
X200-037LFU 10
0.9 1.2
5.5 7 1/2
X200-055LFU
200V
7.5 10
X200-075LFU
8
1.5 2.0
0.4 1/2
X200-004HFE/HFU
0.75 1
X200-007HFE/HFU
1.5 2
X200-015HFE/HFU
16
(75°C only)
2.2 3
X200-022HFE/HFU
3.0 4
X200-030HFE
4.0 5
X200-040HFE/HFU
14
(75°C only)
0.9 1.2
5.5 7 1/2
X200-055HFE/HFU
400V
Class
7.5 10
X200-075HFE/HFU
10
1.5 2.0
Torque
Terminal Connector
Wiring Size
Range (AWG)
Ft-lbs (N-m)
Logic and Analog connectors 30 – 16 0.16 – 0.19 0.22 – 0.25
Relay connector 30 – 14 0.37 – 0.44 0.5 – 0.6
Wire Connectors
WARNING: Field wiring connections
must be made by a UL Listed and CSA
certified ring lug terminal connector
sized for the wire gauge being used.
The connector must be fixed using the
crimping tool specified by the
connector manufacturer.
Terminal (ring lug)
Cable support
Cable