10
Speci cations | Features Continued
Internal Independent Lithium Battery Balancer:
The RDX2 Mini employs an individual-cell-voltage balancer. It is not necessary to connect an external
balancer for balance charging.
Adaptable to Various Types of Lithium Batteries:
The RDX2 Mini will charge a variety of Lithium batteries such as Li-Ion, LiPo, LiFe and the new higher
voltage LiHV batteries.
Multiple Lithium Battery Charge Modes
The RDX2 Mini features three methods of charging: Regular charge, Balance charge and Storage charge
modes. We highly recommend using balance charge as it is the safest and best way to charge Lithium
chemistry batteries. If you plan on not using your Lithium chemistry batteries for an extended period of
time, Storage charge mode is recommended to optimize your packs for long term storage and maximum
lifespan. *For storage, you must start with a pack already discharged below 50%.
Re-Peak Mode of NiMH/NiCd Battery:
In Re-Peak charge mode, the charger can peak charge the battery once, twice, or three times in a row
automatically. This function is useful for ensuring a full battery charge.
Delta-Peak Sensitivity for NiMH/NiCd:
This automatic charge termination program is based on the principle of the Delta-peak voltage detection.
When the battery’s voltage exceeds the threshold, the process will be terminated automatically.
Battery Meter/Battery Resistance:
The user can check the battery's, highest, lowest and total voltage; as well as each individual cell's voltage.
The user can also check the battery’s total internal resistance and the internal resistance of each cell.
Capacity Cut-O Limit:
This feature allows the user to set a limit for the maximum mAh's that can be put into the pack. Once this
limit is reached, the charge process will automatically terminate, and "OVER CHARGE CAPACITY LIMIT" will
be displayed. Default is 5000mAh so set this accordingly to the rated capacity of the pack. To ensure the
pack gets fully charged, this setting should be at least 10% higher than the rated capacity on the pack or
turned to o .
Safety Timer:
Protect your battery by setting a maximum time limit for charging. Default is 120 minutes.
Adjust as needed depending on charge rate.
Charger Connections
To Next Page
Loading...
Need help?
General
