9
AC Input Voltage 100 - 240V
Charge Power 50W x 2
Charge Current Range 0.1-5.0A
Balancing Port Current Drain 300mA/CELL
Trickling Charging Current 50mA-300mA & OFF
NiCd/NiMH Battery Cell Count 6-8 Cells
LiPo/LiHV/LiFe/LiIon Cell Count 2-4 Cells
Pb Battery Voltage 6/12V
Net Weight 500g
Dimensions 100 x 90 x 127mm
Battery Memory (Data Store/Load):
The RDX2 Mini is capable of storing up to 10 di erent charge pro les for your convenience. Users can keep
the data pertaining to any program setting for any battery to facilitate seamless charging. Saved pro les
can be accessed and recalled as necessary.
Terminal Voltage Control(TVC):
For experienced users ONLY, the charger’s end voltage can be reset.
Default setting is recommended. ONLY change in a controlled environment
ALWAYS monitor the battery during charge process.
Twin-Channel Charger:
Hitec’s RDX2 Mini allows you to plug two batteries into the charger simultaneously. The batteries being
charged do not need to have the same con guration. You can connect di erent battery chemistries (NiMH/
NiCd/LiPo/LiFe/Lilon/LiHV/Pb) into any of the charging ports.
AGM (Absorbed Glass Mat) Mode (PB only):
Use this mode to charge your AGM batteries.
Cold Charge Mode (PB only):
Use this mode for charging your standard PB battery in cold conditions.
Battery Icon & Percentage of Charge Display:
The battery charge percentage is displayed in real time.
Speci cations | Features
Warning
To Next Page
Loading...
Need help?
General
