HITEC RDX 2 MiNi User Manual

8
Input Functions
BATT PROG / STOP Button:
Stop a function in-progress or to go back to previous step/screen.
DEC Button:
Scroll through menus or decrease the parameter value.
INC Button:
Scroll through the menus or increase the parameter value.
ENTER/ START Button:
Used to enter parameter or store parameter on screen & start charging.
CHANNEL Button:
It is used to switch from Channel A to B or vice versa.
When changing a parameter value in the program, press the START/ENTER button to make it blink, then
change the value by pressing the DEC and INC button. The value will be stored by repressing the START/
ENTER button. If there is a second parameter to edit on the same screen, it will begin blinking after you
con rm the  rst parameter value. When starting the charge process, press and hold the START/ENTER
button for 3 seconds. When stopping the charge process or go back to previous step/screen, press the
BATT PROG/STOP button once.
When you  rst power the charger on, it displays the last parameters used. From here you can change
the battery type or press enter to change the charge parameters, charge current rate and/or battery cell
count. If you are charging a battery identical to the last one used, then simply press and HOLD the start
button for 3 seconds to begin that process.
BATT. Type/Stop Button
Enter/Start Button
Used to enter parameter
or store parameter on
screen & start charging.
Scroll through
available menus
or increase
parameter values.
It is used to
switch from
Channel A to B
or vice versa.
Scroll through
available menus
or decrease
parameter
values.
Stop the progress of
the current action
or cycle back to the
previous step / screen.
INC. Button
DEC. Button
CHANNEL button

HITEC RDX 2 MiNi Specifications

General

Brand	HITEC
Model	RDX 2 MiNi
Category	Battery Charger
Language	English