23
- LiPo: Multiply the total number of cells in the pack by 3.7. A 3-cell LiPo wired in series will have a
nominal voltage of 11.1 volts (3 x 3.7).
- Lilon: Multiply the total number of cells in the pack by 3.6. A 2-cell Lilon wired in a series will have a
nominal voltage of 7.2 volts (2 x 3.6).
- LiFe: Multiply the total number of cells in the pack by 3.3V. A 2-cell LiFe wired in a series will have a
nominal voltage of 6.6 volts. (2 x 3.3).
- LiHV: Multiply the total number of cells in the pack by 3.8V. A 3-cell LiHV wired in a series will have a
nominal voltage of 11.4 volts. (3 x 3.8).
If the nominal voltage of the battery is not printed on the battery’s label, consult
your battery manufacturer or supplier. Do not attempt to guess the rated voltage
of the battery.
Commonly Used Terms [cont.]
Note
To Next Page
Loading...
Need help?
General
