www.hi-ti.com
28
[Lamination]
This function is available for CS310i / CS320i only.
A: Lamination Side: 4 options to do lamination: No Lamination, Front Side
Lamination, Back Side Lamination, Double Side Lamination.
B: Lamination Type: Lamination ribbon options.
C: Transfer Dwell Time: The speed of the transfer to do lamination.
D: Transfer Temperature: The temperature of the transfer to lamination.
E: Lamination Position: To adjust the initial / terminal positions of lamination.
[About]
This section describes the detailed information of this driver and website
address for any inquiries.
To Next Page
Loading...
