Hitron CGN - Figure 16: the WAN;LAN > Backup Screen; Table 14: the LAN > Backup Screen

WAN/LAN
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
52
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
52
HITRON CGN USER’S GUIDE
Figure 16: The WAN/LAN > Backup Screen
The following table describes the labels in this screen.
Table 14: The LAN > Backup Screen
Backup/Restore Setting
Backup Settings
Locally
Click this to create a backup of all your CGN’s settings
on your computer.
Restore Settings
Locally
Use these fields to return your CGN’s settings to those
specified in a backup that you created earlier.
Click Choose File to select a backup, then click
Restore to return your CGN’s settings to those specified
in the backup.
Reboot/Factory Reset
Reboot Click Reboot to restart your CGN.
Factory Reset Click Factory to return your CGN to its factory default
settings.
NOTE: When you do this, all your user-configured
settings are lost, and cannot be retrieved.
Help Click this to see information about the fields in this
screen.