Hitron CGN - Figure 17: the Firewall > Firewall Options Screen; Table 15: the Firewall > Firewall Options Screen

FIREWALL
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
56
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
56
HITRON CGN USER’S GUIDE
Figure 17: The Firewall > Firewall Options Screen
The following table describes the labels in this screen.
Table 15: The Firewall > Firewall Options Screen
Firewall Select this to turn the firewall on.
Deselect this to turn the firewall off.
NOTE: It is strongly recommended that you enable the
CGN's firewall unless LAN protection is provided
by another device or software.
Intrusion Detection
System
Select this to turn the intrusion detection system off.
Deselect this to turn the intrusion detection system
on.
Ping on WAN Interface Select this to prevent responses to ICMP requests
originating from the WAN.
Select this to allow responses to ICMP requests
originating from the WAN.
Apply Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.