Hitron CGN3 - Leds; Figure 3: Power Adaptor

Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
18
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
18
Hitron CGN3 User’s Guide
1.3 LEDs
This section describes the CGN3’s LEDs (lights).
CABLE Use this to connect to the Internet via an F-type RF
cable.
POWER Use this to connect to the 12v/2A power adapter that
came with your CGN3.
NEVER use another power adapter with your
CGN3. Doing so could harm your CGN3.
Figure 3: Power Adaptor
Table 2: Hardware Connections