Hitron CGN3 - Figure 20: the Basic: Port Forwarding Add;Edit Screen; Table 18: the Basic: Port Forwarding Add;Edit Screen

Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
57
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
57
Hitron CGN3 User’s Guide
Figure 20: The Basic: Port Forwarding Add/Edit Screen
The following table describes the labels in this screen.
Table 18: The Basic: Port Forwarding Add/Edit Screen
Common Application Use this field to select the application for which you want
to create a port forwarding rule, if desired.
Application Name Enter a name for the application for which you want to
create the rule.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Protocol Use this field to specify whether the CGN3 should
forward traffic via:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Transmission Control Protocol and User Datagram
Protocol (TCP/UDP)
Generic Routing Encapsulation (GRE)
Encapsulating Security Protocol (ESP)
NOTE: If in doubt, leave this field at its default (TCP/
UDP).