Hitron CGN3 - Managing Port Forwarding Rules

Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
56
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
56
Hitron CGN3 User’s Guide
4.4.1 Adding or Editing a Port Forwarding Rule
To add a new port forwarding rule, click Add in the Basic > Port Forwarding
screen.
To edit an existing port forwarding rule, select the rule’s radio button in the Basic
> Forwarding screen and click the Edit button.
NOTE: Ensure that Enabled is selected in the Basic > Port Forwarding screen in
order to add or edit port forwarding rules.
The following screen displays.
Remote IP Address This displays the IP address range on the WAN from
which traffic is forwarded (if configured).
Status
Add Click this to define a new port forwarding rule. Port
forwarding must first be set to Enabled. See Adding or
Editing a Port Forwarding Rule on page 56 for
information on the screen that displays.
Edit Select a port forwarding rule’s radio button and click this
to make changes to the rule. Port forwarding must first
be set to Enabled. See Adding or Editing a Port
Forwarding Rule on page 56 for information on the
screen that displays.
Delete Select a port forwarding rule’s radio button and click this
to remove the rule. The deleted rule’s information
cannot be retrieved.
Help Click this to see information about the fields in this
screen.
Table 17: The Basic: Port Forwarding Screen (continued)