Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
26
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
26
Hitron CGN3 User’s Guide
Click Admin > Device Reset. In the screen that displays, click the Factory
Reset button.
After the operation, The CGN3 turns off and on again, using its factory default
settings.
NOTE: Depending on your CGN3’s previous configuration, you may need to re-
configure your computer’s IP settings; see IP Address Setup on page 22.
To Next Page
Loading...
Need help?
General
