Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
74
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
74
Hitron CGN3 User’s Guide
Wireless Channel Select the 5GHz wireless channel that you want to use,
or select Auto to have the CGN3 select the optimum
channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
WPS Enabled Use this field to turn Wifi Protected Setup (WPS) on or
off on the 5GHz network.
Select ON to enable WPS.
Deselect OFF to disable WPS.
WPS AP Pin This field displays the Wifi Protected Setup (WPS)
access point key for the 5GHz network.
Multiple SSID Settings
Primary SSID Click this to view settings for the main 5GHz SSID.
Network Name (SSID) Enter the name that you want to use for this SSID. This
is the name that identifies your network, and to which
wireless clients connect.
NOTE: It is suggested that you change the SSID from
its default, for security reasons.
Enable Use this field to enable or disable the SSID.
Select ON to enable the SSID.
Deselect OFF to disable the SSID.
Broadcast SSID Use this field to make this SSID visible or invisible to
other wireless devices.
Select ON if you want your network name (SSID) to
be public. Anyone with a wireless device in the
coverage area can discover the SSID, and attempt
to connect to the network.
Select OFF if you do not want the CGN3 to
broadcast the network name (SSID) to all wireless
devices in the coverage area. Anyone who wants
to connect to the network must know the SSID.
Table 25: The Wireless: Basic Settings Screen (5G) (continued)
To Next Page
Loading...
Need help?
General
