Hitron CGNV2 - 6.4.1 THE BASIC SCREEN

80
HITRON CGNV2 USER’S GUIDE
WIRELESS
6.3.2.2 WMM
WiFi MultiMedia (WMM) is a Quality of Service (QoS) enhancement that allows
prioritization of certain types of data over the wireless network. WMM provides four
data type classifications (in priority order; highest to lowest):
 Voice
Video
Best effort
Background
If you wish to improve the performance of voice and video (at the expense of other,
less time-sensitive applications such as Internet browsing and FTP transfers), you
can enable WMM. You can also edit the WMM QoS parameters, but are disadvised
to do so unless you have an extremely good reason to make the changes.
6.4 THE WIRELESS SCREENS
This section describes each of the screens that display when you click Wireless in
the toolbar.
6.4.1 THE BASIC SCREEN
Use this screen to configure your CGNV2’s basic wireless settings. You can turn the
wireless module on or off, select the wireless mode and channel, run WPS and
configure the wireless network’s SSID.
Click Wireless > Basic. The following screen displays.
FIGURE 27: The Wireless > Basic Screen