Do you have a question about the Hitron CGNV2 and is the answer not in the manual?
Router Type | Cable |
---|---|
Wi-Fi Standard | 802.11n |
Frequency Bands | 2.4 GHz |
Maximum Wireless Speed | 300 Mbps |
DOCSIS | 3.0 |
Security | WPA, WPA2 |
USB Ports | 1 |
Firewall | SPI |
Details the physical ports and buttons of the CGNV2 device.
Details the Dynamic Host Configuration Protocol for automatic IP address assignment.
Explains how to change the login password for the CGNV2.
Details how to configure CGNV2's LAN IP, subnet mask, DHCP server, and view connected devices.
Describes backing up, restoring, rebooting, and factory resetting CGNV2 settings.
Covers configuration of WAN IP address, subnet mask, DNS, and MTU.
Details how to filter network access based on MAC addresses.
Explains how to prevent specific types of data or communications to/from the WAN.
Guides on allowing specific incoming communications from WAN to LAN devices.
Describes automating port forwarding based on outgoing traffic.
Details configuring MAC address filtering on the LAN.
Explains how to configure IP filtering rules to control traffic.
Covers configuring port forwarding rules between WAN and LAN.
Details configuring port triggering rules for network access.
Explains how to block access to specific websites or keywords.
Details the screen for blocking websites and managing trusted computers.
Introduces wireless security techniques for authentication and encryption.
Explains how to change the wireless network password for enhanced security.
Provides steps to resolve issues where no LEDs are illuminated on the device.
Offers solutions for forgetting the CGNV2's IP address, including reset procedures.
Provides steps to recover forgotten admin credentials, often involving a device reset.
Offers troubleshooting steps for connectivity issues with the CGNV2 and the Internet.
Addresses issues with Internet access where specific LEDs indicate a problem.
Provides solutions for problems connecting wireless devices to the CGNV2.