Transport and installation
13
Assembly instructions
Linear Guideways
GW-04-0-EN-1910-MA
4. Transport and installation
4.1 Delivery state
The following delivery states are possible for linear guideways:
| Fully assembled: blocks are already mounted on the rail, the block is secured on the profile rail with the transporta-
tion safety device.
| Unmounted: Blocks and rails are supplied separately
4.2 Scope of delivery
The contents of delivery vary depending on the ordered model, accessories, and options.
The linear guideways are precision products and must be treated with care. Impacts of any kind may damage
the product. The result may be compromised running precision and service life. Transport the packaged linear
guideway as close as possible to its installation site. Remove the packaging at this site only.
4.3 Transport to the installation site
Danger from suspended loads or falling parts!
Lifting heavy loads may damage your health!
X Only qualified personnel may assemble, install, and service the linear guideways!
X Note the mass when transporting the parts. Use suitable hoisting gear!
X Observe the applicable occupational health and safety regulations when handling suspended loads!
X Before transport, secure the linear guideways against tilting!
WARNING!
Danger of impacts and crushing!
If no transportation safety device is used, the block can move uncontrolled on the profile rail and cause
injuries.
X Only remove transportation safety device upon assembly!
CAUTION!
Risk of material damage!
Deflection during transport impairs the function and accuracy of the linear guideways.
X Support long linear guideways during transport at several points!
ATTENTION!
4.3.1 Ambient conditions
Ambient temperature +5 °C to +40 °C
Installation site flat, dry, vibration-free
Atmosphere not corrosive, not explosive
Safety equipment to be provided by the operator
Possible safety equipment/measures:
| Personal protective equipment in accordance with UVV (German accident prevention regulations)
| Zero-contact protective equipment
| Mechanical protective equipment
4.4 Storage
X Store the linear guideways in their transport packaging.
X Only store the linear guideways in dry, frost-free areas with a corrosion-free atmosphere.
X Clean and protect used linear guideways axis systems before storage.
To Next Page
Loading...