32
Commissioning
Assembly instructions
Linear Guideways
GW-04-0-EN-1910-MA
6. Commissioning
If you have ordered a mounted linear guideway, remove the green stoppers before commissioning. These stop-
pers secure the block on the profile rail.
Risk of damage to health and the environment!
Contact with lubricants can cause irritation, poisoning and allergic reactions as well as damage to the
environment.
X Only use suitable substances that are safe for humans. Observe the manufacturer’s safety data sheets.
X Dispose of substances appropriately.
CAUTION!
Danger of damage to the linear guideways due to missing or incorrect lubrication!
Missing initial lubrication or excessive lubricant quantities/excessive lubrication pressure can damage or destroy the
product.
X Never put the linear guideway into operation without initial lubrication!
X The specified procedure must be observed in order to avoid damaging the product!
ATTENTION!
The standard lubrication conditions for the products can be found in Section 8.10. Please follow the commissioning instruc-
tions in accordance with Section 8.11.
To Next Page
Loading...