Hiwin MG Series - Page 40

40
Lubrication
Assembly instructions
Linear Guideways
GW-04-0-EN-1910-MA
Fig. 8.8 Grease nipple M3 × 0,5 P
Art.-No. 20-000275
Fig. 8.9 Grease nipple M4 × 0,7 P
Art.-No. 20-000272
Fig. 8.10 Grease nipple M6 × 0,75 P
Art.-No. 20-000273
Fig. 8.11 Grease nipple ⅛ PT
Art.-No. 20-000280
Fig. 8.12 Funnel type grease nipple M4 × 0,7 P
Art.-No. 20-000325
Fig. 8.13 Funnel type grease nipple M6 × 0,75 P
Art.-No. 20-000283
Fig. 8.14 Funnel type grease nipple M3 × 0,5 P
Art.-No. 20-000370
8.3.4 Grease nipple