Need help?Do you have a question about the Hobart Handler 140 and is the answer not in the manual?
General| Input Voltage | 115V |
|---|---|
| Welding Amperage Range | 25-140 A |
| Duty Cycle | 20% @ 90A |
| Wire Feed Speed Range | 40-700 IPM |
| Weldable Materials | Mild Steel, Stainless Steel, Aluminum |
| Weight | 57 lbs |
| Processes | MIG (GMAW), Flux-Cored (FCAW) |
| Input Current | 20A |
| Welding Thickness | 24 ga. - 1/4 in. |
| Input Phase | Single Phase |
| Maximum Open Circuit Voltage | 28V |
| Wire Size Range | 0.023 - 0.035 in |
To Next Page
