Hologic DISCOVERY A - Page 162

Discovery QDR Series Technical Manual
4-40
SpineLoGain=8,0 Factory
SpineHiGain=10,2 Factory
SpineLoGain=10,1 Factory
DecubHiGain=3,3 Factory
DecubLoGain=3,3 Factory
HipHiGain=6,3 Factory
HipLoGain=6,2 Factory
HipHiGain=7,2 Factory
HipLoGain=7,1 Factory
IVAHiGain=6,1 Factory
IVALoGain=6,1 Factory
[Flattening]
DailyFlatFile=FLT721NA.DCL Automatic
[Aperture] Size Parameters: Number, Length, Width
Size=0, 2.510, 0.04 Factory
Size=1, 2.510, 0.04 Factory
Size=2, 2.510, 0.04 Factory
Size=3, 2.510, 0.04 Factory
Size=4, 2.510, 0.04 Factory
Size=5, 2.510, 0.04 Factory
Size=6, 2.400, 0.04 Factory
Size=7, 2.400, 0.02 Factory
Size=8, 2.510, 0.04 Factory
Size=9, 2.510, 0.04 Factory
Size=10, 2.510, 0.04 Factory
Size=11, 2.510, 0.04 Factory
Size=12, 2.510, 0.04 Factory
Size=13, 2.510, 0.04 Factory
Tolerance=10 +/- Tolerance to center of aperture
Slot=0, 4439 Factory Number and distance to center of aperture
Slot=1, 4139 Factory
Slot=2, 3679 Factory
Slot=3, 3464 Factory
Slot=4, 3099 Factory
Slot=5, 2904 Factory
Slot=6, 2524 Factory