Honda BF75D - Moorage; G Type

107
OPERATION
Moorage (G type)
Tilt up the outboard motor using the
tilt lock lever when mooring the boat.
Move the shift lever to the
NEUTRAL position and stop the
engine before tilting up the outboard
motor.
Before tilting up, leave the outboard
motor in the running position for one
minute after stopping the engine to
drain the water from inside the
engine.
Stop the engine and disconnect the
fuel line from the outboard motor
before tilting the outboard motor.
1. Move the tilt lever to the FREE
position and raise the outboard
motor as far as it goes by holding 
it by the grip of the engine cover
(see page 37).
2. Move the tilt lock lever to the
LOCK position and lower the
outboard motor slowly.
3. Move the tilt lever to the LOCK
position.
4. To tilt down, move the tilt lever to
the FREE position, and move the
tilt lock lever to the FREE position
while lifting the outboard motor to
the designated position and move
the tilt lever to the LOCK position.
TILT LOCK LEVER
TILT LOCK LEVER
FREE
LOCK
<;DQQMࡍ࡯ࠫ㧞㧜㧝㧟ᐕ㧝㧜᦬㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ