94
OPERATION
Avoid sharp and abrupt operation
of the control lever. Operate it
moderately. Operate the control
lever and raise the engine speed
after making sure that the gear was
shifted securely.
Move the control lever(s)
approximately 35° toward the
FORWARD or REVERSE position to
engage the desired gear.
When the boat is mounted with the
two outboard motors, hold the control
lever in the center as shown, and
operate the right and left levers
simultaneously.
Moving the control lever(s) further
from approximately 35° will increase
throttle opening and boat speed.
Gear Shifting
(R3 type)
REMOTE CONTROL
LEVER
(SINGLE TYPE) (DUAL TYPE)
REMOTE CONTROL LEVERS
REMOTE
CONTROL
LEVER
REVERSE
NEUTRAL
FORWARD
NEUTRAL
FORWARD
REVERSE
<;DQQMࡍࠫ㧞㧜㧝㧟ᐕ㧝㧜㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ
To Next Page
Loading...
