126
MAINTENANCE
MAINTENANCE SCHEDULE
(1) Lubricate more frequently when used in salt water.
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the Honda
Shop Manual for service procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(6) Replace the anodes when they have been reduced to about two-thirds of their original size, or if they are crumbling.
ITEM
Each use After use
First
month
or
20 hrs.
Every
6 months
or
100 hrs.
Every
year
or
200 hrs.
Every
2 years
or
400 hrs.
Refer to
page
Engine oil Check level o 59
Change o o 128
Engine oil filter
Replace
o (2) —
Gear case oil Change o (2) o (2) —
Throttle linkage Check-adjust o (2) o (2) —
Valve clearance Check-adjust o (2) —
Spark plug (Standard plug) Check-adjust/Replace o 130—132
Spark plug
(Optional iridium plug)
Check o 132—133
Clean o (2) —
Replace o 132—133
Propeller and cotter pin Check o 64
Anode (Outside engine) Check o 69
Anode (Inside engine) Check o (2) (6) —
Idling speed Check-adjust o (2) o (2) —
Lubrication Grease o (1) o (1) 136, 137
Water separator Check o 138
REGULAR SERVICE PERIOD (3)
Perform at every indicated month or operating
hour interval, whichever comes first.
<;DQQMࡍࠫ㧞㧜㧝㧟ᐕ㧝㧜㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ
To Next Page
Loading...
