115
OPERATION
3. If the overheat warning system
stays activated, stop the engine. Tilt
up the outboard motor and check
the water intakes for
obstructions. If there are no
obstructions at the water intakes,
return to the closest boat landing
and contact your closest outboard
motor dealer.
When the PGM-FI activated:
1. Consult with an authorized Honda
outboard motor dealer.
When the ACG warning system is
activated:
1. Check the battery (see page 134).
If the battery is OK, consult with an
authorized Honda outboard motor
dealer.
When the water separator buzzer
sounds:
1. Check the water separator for
water contamination. If water is
accumulated, clean them (see page
138).
COOLING WATER INTAKE PORT
(each side)
<;DQQMࡍࠫ㧞㧜㧝㧟ᐕ㧝㧜㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ
To Next Page
Loading...
