Honda FC600 - Page 20

18
OPERATION
HONDA FC600 (E) xxxxxxxxxxxx -18-
3. Turn the engine switch to the
ON position.
4. Move the throttle lever away
from the SLOW position, about
1/3 of the way toward the FAST
position.
5. Pull the starter grip lightly until
you feel resistance, then pull
briskly in the direction of the
arrow as shown.
Do not allow the starter grip to snap
back against the engine. Return it
gently to prevent damage to the
starter.
ON
ENGINE SWITCH
THROTTLE LEVER
SLOW
STARTER GRIP
Direction to pull
00X31-733-7200_FC600_EN.book 18 ページ ２０１２年４月２０日 金曜日 午後８時５分