38
SERVICING YOUR TILLER
HONDA FC600 (E) xxxxxxxxxxxx -38-
6. After adjustment has been completed, fasten the belt stopper bolts
securely.
7. Install the belt cover.
After checking or adjusting the drive belt, be sure to reinstall the belt cover.
The cover is designed to help shield you from the moving belt and pulleys.
Contact with the moving belt or
pulleys may cause you or your
clothing to get caught in the moving
parts resulting in serious accident
or injury.
Always keep the belt cover installed
when operating the tiller.
00X31-733-7200_FC600_EN.book 38 ページ ２０１２年４月２０日 金曜日 午後８時５分
To Next Page
Loading...
