REAR DRIVING MECHANISM
Oil seal driver
07965-KE80200
not available in
U.S.A.
Bearing clip compressor, 28 mm
070ME-HN8A200
Pinion puller base
07HMC-MM80110
or 07HMC-MM8011A (U.S.A. only)
Driver attachment
07LAD-PW50500
Pinion holder
07SMB-HM70200
Puller attachment
07YMC-GCS0100
(not available in U.S.A.) or 07949-
3710001,
07746-0010700 and 07746-
0040400
TROUBLESHOOTING
Excessive noise
• Worn or damaged bearing
• Worn or scored splines
• Worn or damaged drive shaft, propeller shaft or universal joint
• Worn pinion and ring gears
• Excessive backlash between pinion and ring gears
• Oil level too low
Wobble or vibration in vehicle
• Axle not tightened properly
• Bent axle
Oil leak
• Oil level too high
• Clogged breather
• Damaged seals
• Loose case cover
19-5
To Next Page
