Honeywell 4850DR - Page 130

9 - 11
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 6-3
Maximum (2 - 60) *60 CBRMAX## 6-3
Code 39 Default All Code 39
Settings
C39DFT 6-4
Off C39ENA0 6-4
*On C39ENA1 6-4
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 6-4
Transmit C39SSX1 6-4
Code 39 Check Char. *No Check Char. C39CK20 6-4
Validate, But Don’t
Transmit
C39CK21 6-4
Validate,
and Transmit
C39CK22 6-4
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 6-5
Maximum (0 - 48) *48 C39MAX## 6-5
Code 39 Append *Off C39APP0 6-5
On C39APP1 6-5
Code 32 Pharmaceutical (PARAF) *Off C39B320 6-5
On C39B321 6-5
Code 39 Full ASCII *Off C39ASC0 6-6
On C39ASC1 6-6
Code 39 Code Page C39DCP 6-6
Interleaved 2 of 5 Default All Interleaved
2 of 5 Settings
I25DFT 6-7
Off I25ENA0 6-7
*On I25ENA1 6-7
Interleaved 2 of 5 Check Digit *No Check Char. I25CK20 6-7
Validate, But Don’t
Transmit
I25CK21 6-7
Validate, and Transmit I25CK22 6-7
Interleaved 2 of 5 Message Length Minimum (2 - 80) *4 I25MIN## 6-7
Maximum (2 - 80) *80 I25MAX## 6-7
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 6-8
Off N25ENA0 6-8
*On N25ENA1 6-8
NEC 2 of 5 Check Digit *No Check Char. N25CK20 6-8
Validate, But Don’t
Transmit
N25CK21 6-8
Validate, and Transmit N25CK22 6-8
NEC 2 of 5 Message Length Minimum (2 - 80) *4 N25MIN## 6-9
Maximum (2 - 80) *80 N25MAX## 6-9
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page