Honeywell 60 Series - 10 Viewing System Information; Log; Figure 10-1 System Log

Honeywell 60 Series IP Camera Software Configuration Guide
86
10 Viewing System Information
This chapter contains the following sections:
• Log, page 86
• Version, page 87
Log
Go to Setup Information Logs.
System Log
System log displays the system events in a chronological order. The system log is stored in the
camera’s buffer area and will be deleted after the camera is rebooted.
Figure 10-1 System Log
Access Log
Access log displays the access time and IP address of all viewers (including operators and
administrators) in a chronological order. The access log is stored in the camera’s buffer area
and will be will be deleted after the camera is rebooted.