Honeywell 60 Series User Manual

Configuring Video Analytics
67
Figure 7-11 Event Settings Examples
When the Event Status is ON, the event configuration above is triggered by motion detection,
the camera will automatically send snapshots via e-mail.
If you want to stop the event trigger, you can click on the ON button to turn it to OFF status or
click DELETE to remove the event setting.
To remove a server setting from the list, select a server name and click DELETE.
You can only delete a server setting when it is not applied in an existing event setting.
To remove a media setting from the list, select a media name and click DELETE.
You can only delete a media setting when it is not applied in an existing event setting.
Package Management
Go to Setup Video Analytics  Package Management.
Figure 7-12 Package Management

Honeywell 60 Series Specifications

General

Weatherproof Rating	IP66
Power Supply	12V DC
Lens Type	Fixed
Night Vision	Yes
IR Distance	Up to 30m (98ft)
Video Compression	H.264
Protocols	RTSP
Smart Features	Motion detection
Resolution	1920x1080 (Full HD)
Operating Temperature	-30°C to 60°C (-22°F to 140°F)