Honeywell 60 Series User Manual

Honeywell 60 Series IP Camera Software Configuration Guide
80
Network Setup: Check to retain the Network Type settings (see Configuring Network General
Settings on page 44).
Daylight Saving Time: Check to retain the Daylight Saving Time settings (see Importing
/Exporting Files on page 80).
Focus position: Check to retain the lens focus position using the previously saved position
parameters.
If none of the options is selected, all settings will be restored to factory default. Click
RESTORE and the camera will be rebooted.
After it is completed, the live video page will be displayed in your browser.
If the connection fails after rebooting, manually enter the IP address of the camera in the
address field to resume the connection.
Importing /Exporting Files
Export / Update daylight saving time rules, custom language file, configuration file, and
server status report.
Figure 9-3 Import/Export Files
Export daylight saving time configuration file
Follow the steps below to export daylight saving time configuration file from the camera and
set the start and end time of DST.
1. Click EXPORT under Export daylight saving time configuration file.

Honeywell 60 Series Specifications

General

Weatherproof Rating	IP66
Power Supply	12V DC
Lens Type	Fixed
Night Vision	Yes
IR Distance	Up to 30m (98ft)
Video Compression	H.264
Protocols	RTSP
Smart Features	Motion detection
Resolution	1920x1080 (Full HD)
Operating Temperature	-30°C to 60°C (-22°F to 140°F)