Honeywell 60 Series User Manual

i
About This Document
This document provides instructions for accessing, configuring, and operating the Honeywell
60 Series IP cameras. This document is intended for system installers, administrators, and
operators.
Overview of Contents
This document contains the following chapters and appendixes:
• Chapter 1, Introduction, provides an overview of the main features of the Honeywell 60
Series IP cameras.
• Chapter 2 , Accessing the Camera, describes how to install the Unified Tool to access the
camera remotely from a web browser. It also describes how to update your camera’s
firmware.
• Chapter 3, Logging In and Viewing Live Video, describes how to log in to a camera and
using the main page.
• Chapter 4, Configuring Camera Settings, describes how to configure the camera settings.
• Chapter 5, Configuring PTZ Settings, describes how to configure the PTZ settings.
• Chapter 6, Configuring Network Settings, describes how to configure the network settings.
• Chapter 7, Configuring Video Analytics, describes how to configure video analytics.
• Chapter 8, Configuring Storage Settings, describes how to configure storage settings.
• Chapter 9, Configuring System Settings, describes how to configure general system
settings.
• Chapter 10, Viewing System Information, describes how to view system log, access log and
firmware version.
• Chapter 11, Troubleshooting, lists common problems and solutions.
• Chapter 12, Appendix, lists the descriptions of symbols.

Honeywell 60 Series Specifications

General

Weatherproof Rating	IP66
Power Supply	12V DC
Lens Type	Fixed
Night Vision	Yes
IR Distance	Up to 30m (98ft)
Video Compression	H.264
Protocols	RTSP
Smart Features	Motion detection
Resolution	1920x1080 (Full HD)
Operating Temperature	-30°C to 60°C (-22°F to 140°F)