Setup (Cont'd)
49
SCREEN ACTION
3. Touch the box next to Enter User
Name. The Enter Data keyboard screen
is displayed.
4. Type in the user name (6 characters
max. with no spaces between
characters) and press the OK button.
Notes:
• Use the Shift button for capital letters.
• Use the BS (Backspace) button to
make corrections.
• The @#$ button is not available for use
at this time. These characters cannot
be saved to the control panel.
Select the partitions, access level, and
enter a user number for this user.
If assigning this user to wireless key, enter
one of the zone numbers of the keyfob
(the wireless key must be programmed
first before it can be assigned to a user).
5. Touch the box next to User Number.
The "User Authorization" screen is
displayed with the instructions "Enter 3
Digits".
To Next Page
Loading...
