Honeywell BC-200 - Analog Device Lists

Panel Operation
BC-200 Manual – P/N DOC-01-013 33
7.3.3.7 SERVICE MENU – LIST – LIST – ANALOG
This menu will list all Analog addressable loops (1 – 4), you can then select detectors or modules, then read
status or change or test a point.
1) LOOP 1
2) LOOP 2
3) LOOP 3
4) LOOP 4
ZONE 1, KITCHEN LEVEL 6
ANALOG LIST - LOOP
A = 0
F = 0
I = 0
N = 0
SELECT
20 JULY 2002 14:44:37
USE BUTTONS/NUMBERS TO SELECT LOOP
DAY MODE
BACKUP DOWN
Actions:
 Use the UP and DOWN buttons to scroll through
the Analog loop list.
 Use the SELECT button to select the loop to list.
 Alternatively press 1 through 4 .
Once you have selected the loop you will be prompted to select detectors or modules as follows:
SELECT DEVICE ON LOOP 1:
1) DETECTOR
2) MODULE
ANALOG LIST – DETECTOR/MODULE
20 JULY 2002 14:44:37
A = 0
F = 0
I = 0
N = 0
SELECT
USE BUTTONS/NUMBERS TO SELECT DEVICE
DAY MODE
BACKUP DOWN
Actions:
 Use the UP and DOWN buttons to select option.
 Use the SELECT button to select the loop to list.