CHAPTER
2
Operations
Learn what you can do with your Honeywell BW™ Icon Detector, from commissioning to
Calibration.
Activate the Detector
To turn the detector on, press, and hold the button for four seconds. LEDs light and the
instrument vibrates and beeps.
The detector performs a Self Test and Sensors warm-up.
During the Self Test, the icons light and the IntelliFlash flashes in amber.
During the Sensor warm-up, the sensors LEDs flash clockwise.
In the regular mode, the IntelliFlash flashes in green every five seconds.
Self Test
When the detector is activated, it performs several start-up tests.
l Battery
l Data Flash
l RTC. Real Time Clock
l Temperature sensor.
l BLE module
l Sensors
l Bump and Calibration due date
When the detector has passed all the start-up self-tests, it enters the regular operation mode.
Deactivate the Detector
To deactivate your Honeywell BW™ Icon, press the button for four seconds.
The instrument beeps and vibrates, and the alarm LEDs light in red.
BW Icon 9 User Manual
www.CanarySense.com
Shop for Gas products online at:
1.888.610.7664
To Next Page
Loading...
