BLE Status Description
Pairing
The BLE icon flashes every second, Tee IntelliFlash flashes every
five seconds, and two shot beeps.
Succeed
The BLE flashes in blue every 15 seconds. The IntelliFlash
flashes every five seconds in green.
Fail The BLE icon is solid red, and two short beeps.
Calibration
Perform a calibration to adjust the sensitivity levels of sensors and ensure accurate responses to
gases.
The detector can be calibrated in two ways:
• Apply gas from a cylinder to the sensors using the Safety Suite Device Configurator (SSDC)
software or the Device Configurator (DC) app.
• Use an IntelliDoX module. For further reference see the IntelliDox User Manual.
BW Icon 11 User Manual
www.CanarySense.com
Shop for Gas products online at:
1.888.610.7664
To Next Page
Loading...
