8-12
8. SERVICE
SUB-MATRIX PARAMETER CLASSIFICATION
PRINTER
COLOR CALIB
DEFINITION:
Test to show the current mechanical color adjustment.
HOW TO USE/EXECUTE IT:
Press ENTER to confirm or SETUP to leave.
Description:
- First step gives a rough idea of adjustment, 6 zones from left to right red,
brown, green, purple, blue and black.
- Second step: String of blue characters
- Third step: String of purple characters
- Fourth step: String of green characters
- Fifth step: String of brown characters
Target is to get at least in the four strings: low dash from 0 to 4 in the good
color and up dash from 4 to 0 in the good color.
To increase low dash number in the good color give a positive value by
pressing the
[key quantity proportional to graduations.
To increase up dash number in the good color give a negative value by
pressing the
] key quantity proportional to graduations.
The recorder accepts value by pressing ENTER then the recorder prints
the adjustment test with the new value.
You leave color calibration mode by pressing SETUP.
To Next Page
Loading...
